Steps To Make Bootable Pendrive
Step 1: Insert your pendrive in USB Port
Step 2: Navigate toStart>>Run[OR press
Ctrl R] and typecmdand press Enter to open
Command Prompt.
|Windows Vista and Windows 7 users will
have to navigate to Start>>All
Programs>>Accessories>>Right-click on
Command Prompt and select Run as
Administrator|
Step 3: In Command Prompt type DISKPART
Step 4: The next step is to type LIST DISK
and press Enter
Step 5: Observe carefully, you will see Disk
0 normally this is your Hard Disk Find your
USB Device number, In my caseDisk 1 is my
USB pen drive Please note that Disk 1 may not
pen drive in your case, so be careful with this
step
Step 6: Now type SELECTDisk1 and press
Enter
Step 7: Now type CLEAN and press Enter,
this will erase data from Disk 1(in my case)
i.e. your Pen Drive.
Step 8: Type Create Partition Primary
andpress Enter
Step 9: Type Select Partition 1 and press
Enter
Step 10: Type Active and press Enter
Step 11: Type Format FS:NTFS Quick and
press Enter, this will format your USB
PenDrive.
Step 12: Type Assign and press Enter
Step 13: Now, finally type Exit and press
Enter
Step 14:Now copy the windows files to your
pendrive.
That's done!!!